Manufacturing IoT
Indiana Automotive Plants Move Deeper Into Smart Manufacturing
Published by IOT Indiana Research & Editorial Team

- What is changing in automotive manufacturing
- What OEMs and Tier 1 buyers generally expect from suppliers
- Where smart manufacturing pays off in an automotive plant
- Stamping and pressing
- Welding and joining
- Painting and coating
- Assembly
- Plastics and molding
- Logistics and material flow
- A worked example: lifting OEE on a molding line
- Energy and utilities: an easy first win
- Common mistakes in automotive smart manufacturing projects
- A staged plan for a mid-size supplier
- Stage 1: See (months 1 to 3)
- Stage 2: Trace (months 3 to 8)
- Stage 3: Predict (months 8 to 14)
- Stage 4: Optimize (months 14 and beyond)
- Support and funding in Indiana
- What to watch next
- The bottom line
Indiana makes cars. Toyota builds the Grand Highlander and four other vehicles in Princeton, with about 7,300 workers and nearly 430,000 vehicles produced in 2025, according to local reporting. In March 2026 Toyota announced a $200 million investment at that plant to increase capacity for the Grand Highlander. Other automakers and a deep supplier network across the state add to a sector that has to keep improving cost, quality and flexibility under constant pressure.
This article looks at the supplier side of the story, because that is where most Indiana automotive jobs and most smart-manufacturing decisions sit. It covers what carmakers tend to expect from suppliers, where sensors and connected systems earn their keep, a worked example of improving overall equipment effectiveness, and a staged plan that works for plants without large technology budgets.
What is changing in automotive manufacturing
Several pressures push plants toward connected manufacturing at the same time.
- Model and powertrain mix. Automakers are adding hybrids, and some are adjusting electric vehicle plans. Flexible lines, quick changeovers and reliable data about what was built are more valuable when the product mix keeps changing.
- Quality expectations. Recalls are expensive, and carmakers push suppliers for tighter traceability and faster containment when problems appear.
- Cost and trade conditions. Tariff and trade policy changes affect material and part costs and sourcing choices, and manufacturers look to productivity gains to offset them.
- Labor availability. Skilled workers are hard to hire, so plants lean on automation, guided workflows and remote monitoring to stretch teams.
- Energy and sustainability reporting. Customers increasingly ask suppliers for energy and emissions data.
The Toyota announcement is a good reminder of how investment actually lands. A capacity expansion at one plant can ripple through stamping, seating, wiring, plastics and logistics suppliers, who must scale quality and delivery at the same time.
What OEMs and Tier 1 buyers generally expect from suppliers
| Expectation | What it looks like on the floor |
|---|---|
| Quality management system | IATF 16949 certification or equivalent, documented control plans and corrective actions |
| Traceability | Lot and serial records linking material, process settings and inspection to each shipment |
| Process capability | Statistical evidence, such as Cpk values, that critical characteristics stay within tolerance |
| Delivery reliability | On-time performance, schedule visibility and fast response to changes |
| Error proofing | Sensors and vision checks that prevent wrong parts, missing components or incorrect settings |
| Cybersecurity and data handling | Documented network practices and controlled access to customer data |
Each of these can be supported with industrial IoT, and each is easier to defend with data than with opinions.
Where smart manufacturing pays off in an automotive plant
Stamping and pressing
Presses are heavy, fast and expensive when idle. Tonnage monitoring can show die wear and misfeeds. Vibration and temperature on motors, clutches and brakes supports predictive maintenance. Coil tracking links steel lots to parts for traceability.
Welding and joining
Resistance welding current, force and time can be monitored per weld, with deviations flagged immediately. Adhesive dispensing, ultrasonic welding and laser systems provide their own process signatures. Storing this data against part serial numbers supports containment when a defect is found.
Painting and coating
Temperature, humidity, air flow and film build influence finish quality. Environmental sensors and oven profiling give teams early warning, and energy monitoring on ovens helps manage a major utility cost.
Assembly
Smart tools record torque and angle for each fastener. Vision systems verify presence, orientation and marking. Poka-yoke sensors prevent wrong parts or skipped steps. Digital work instructions guide operators through variants without paper binders.
Plastics and molding
Injection molding machines produce pressure, temperature and cycle time data. Linking those with part quality helps tune processes and identify drift. Mold monitoring supports maintenance planning for expensive tools.
Logistics and material flow
Barcode or RFID tracking of racks, returnable containers and finished goods improves schedule visibility and reduces searching and shortages. Real-time location can cut forklift travel and find stray inventory.
A worked example: lifting OEE on a molding line
Overall equipment effectiveness combines availability, performance and quality. The following numbers are invented to show a method.
A supplier runs an injection molding cell making interior trim parts. Operators estimate the cell runs well, but no one has measured it. The plant adds a simple machine monitor that records run state, cycle count and reject counts.
- Baseline. After two weeks, the data shows availability of 78 percent, performance of 88 percent and quality of 97 percent. OEE is the product: 0.78 times 0.88 times 0.97, about 67 percent.
- Find the loss. Downtime reasons recorded at the machine show that mold changeovers and waiting for material cause most stops, more than mechanical failures.
- Act. The team standardizes changeover steps and changes the material staging routine.
- Re-measure. Availability climbs to 85 percent. With performance and quality unchanged, OEE becomes about 73 percent.
A six-point gain on a cell that earns a margin on each part is meaningful, and the investment, a monitor and some operator training, is modest. The lesson is that measuring comes first. Many plants spend money on equipment when their largest loss is process.
Energy and utilities: an easy first win
Automotive plants consume large amounts of electricity, compressed air, natural gas and water. These utilities are measurable with relatively simple equipment, and the results are easy to explain to finance teams, which makes them a practical entry point.
- Compressed air. Leaks commonly waste a significant share of compressor output. Flow meters and pressure sensors on the main header can reveal weekend consumption, a telltale sign of leaks.
- Ovens and furnaces. Gas and temperature monitoring shows idle time and overheating.
- Presses and large motors. Sub-metering identifies the biggest consumers and the effect of scheduling.
- Peak demand. Utilities often bill on peak demand. Alerts that warn when the plant approaches its peak help supervisors shift loads.
Start by measuring non-production hours. If a plant draws nearly as much power on Sunday as on Wednesday, the finding is hard to dispute and the fixes are usually inexpensive. Savings can then fund machine-level monitoring in later stages.
Common mistakes in automotive smart manufacturing projects
- Starting with the most complex line. Pick a contained area with clear costs, such as one press or one cell.
- Measuring everything but acting on nothing. Assign an owner and a review rhythm to each key indicator.
- Ignoring maintenance and calibration of sensors. A bad sensor is worse than no sensor because it breeds mistrust.
- Locking into proprietary systems. Insist on data export and standard interfaces so you can change tools later.
- Skipping the people side. Production supervisors and maintenance technicians decide whether a system survives. Train them and ask for their input.
A staged plan for a mid-size supplier
Stage 1: See (months 1 to 3)
Install basic machine monitoring on a handful of critical assets to capture run state, cycle count and downtime reasons. Put a simple board in the production area that shows today's results. The goal is a believable baseline.
Stage 2: Trace (months 3 to 8)
Connect process data and inspection results to part or lot identifiers. Begin with the product family your largest customer cares about. Set up a procedure for rapid containment using the data.
Stage 3: Predict (months 8 to 14)
Add condition monitoring to equipment whose failure stops the line. Use trends from the first two stages to select assets and thresholds, rather than monitoring everything.
Stage 4: Optimize (months 14 and beyond)
With data flowing, look at energy, scheduling and quality correlations. Consider analytics or machine learning only for problems where simple methods have been exhausted.
Support and funding in Indiana
Purdue Manufacturing Extension Partnership consultants regularly help Indiana manufacturers with lean practices and technology adoption. Conexus Indiana and the Next Level Manufacturing Institute support advanced manufacturing initiatives and training. Funding programs shift, and the Manufacturing Readiness Grants were paused in 2025, so check current options with the IEDC and local economic development organizations. Utilities also sometimes offer incentives for energy efficiency projects that include metering and controls.
What to watch next
Several developments will influence how fast Indiana plants move. Watch tariff and trade decisions, which change sourcing and cost structures. Watch automaker model and powertrain plans, which shape demand for specific parts. Watch workforce programs and wages, since competition from other sectors including semiconductors, pharmaceuticals and data centers is intensifying. And watch customer requirements for cybersecurity and data sharing, which are growing steadily.
These pressures are connected. A supplier that has good data on its processes can respond faster to a customer's schedule change, a cost target or a quality complaint. That responsiveness is increasingly what wins and keeps business.
The bottom line
Indiana's automotive plants do not need futuristic factories to benefit from smart manufacturing. They need reliable measurements of the processes that matter, records that connect parts to those processes, and teams that act on what the data says. Start with a clear baseline, fix the largest losses first, and expand only when each step has proven its value. Customers already expect it, and suppliers who deliver it will be better protected when conditions change.
Frequently asked questions
Related articles
Manufacturing IoT
Indiana's Semiconductor Push Creates a New Smart-Manufacturing Ecosystem
SK hynix's $4 Billion Indiana Semiconductor Hub: Where Industrial IoT Fits
Manufacturing IoT
